While considering building a new prefab home in one of Colorado’s Mountain towns such as Vail, Breckenridge, Aspen, Telluride, Steamboat Springs, or Crested Butte can be exciting, the process of beginning a new prefab home build can seem overwhelming. That is why we created our Guide to Building Prefab and Modular Homes in Colorado's Mountain Towns so that we could address the most common questions we receive regarding the prefab home building process. In this guide we cover questions such as, “How much will it cost to build a prefab home in Aspen, Colorado?” to, “Which companies serve the Steamboat Springs area?” Continue reading below to better understand the prefab and modular home building process in towns such as Vail, Breckenridge, Aspen, Telluride, Steamboat Springs, and Crested Butte, or connect with one of our prefab concierge representatives to receive advice tailored specifically to your project.

Why Might You Want to Build a Prefab Home in Colorado’s Mountain Towns - (Vail, Breckenridge, Aspen, Telluride, Steamboat Springs, Crested Butte)

• Quick Build Times - prefab and modular homes are manufactured off-site and assembled at the final build site which allows for multiple steps of the project to be completed simultaneously and more efficiently than a traditional home build. This often results in shorter build times than traditional, site-built homes.

• Cost Controlled - using a highly controlled build process (homes are manufactured in climate-controlled production and cutting facilities), unforeseen cost overruns can be better managed leading to reduced overall cost. This is especially necessary for high cost areas of Colorado's Mountain Towns such as Vail, Breckenridge, Aspen, Telluride, Steamboat Springs, and Crested Butte. 

• Sustainable & Modern - many of the prefab and modular home manufacturers that serve the Salt Lake City and Park City areas offer energy efficient, and in some cases, net-zero homes. Many of these manufacturers also offer modern designs, and high-tech elements and appliances.

  • Durable - manufacturers that serve Colorado's Mountain Towns offer products that are manufactured with consideration of the natural hazards of the area such as heavy snowfall

Key Decisions to Make:

• Home Location - while the initial cost to build a prefab home may be rather high in areas like Vail, Breckenridge, Aspen, Telluride, Steamboat Springs, or Crested Butte, a newly-built prefab home in these areas can be a sound long-term investment. When considering where exactly to build your home, you should be mindful of a few things that could affect your project:

  • Slope of lot - steep hills can make it difficult to build most pre-designed prefabs, and may require a custom designed and engineered home

  • Set back requirements which can limit the buildable area of your property

  • Floor area ratio or other zoning protocols that may affect the possible size of the home 

  • Whether or not your city requires a design review

• Custom vs. Standard - While most builders offer a set of pre-designed floor plans, while some also offer options for partial or total home customization. Other builders may specialize in custom prefab home designs. If you live on a tricky lot (uneven terrain, small-lot size, etc.) you may face a limited offering of standard home designs that are suitable for your home build

• Modular vs. Kit Home v.s. Panelized - While all three of these construction techniques qualify as prefab home building techniques, there are nuances that you should know when building your own prefab house. These prefab home styles include:

  • Modular - homes are made up of multiple box-like modules. These modules are fully manufactured and assembled off-site and consist of floors, walls, ceilings, wiring, plumbing, and internal fixtures. After being assembled in an off-site facility, they are shipped to your desired location and the modules are connected and fastened to the foundation. Modular construction is one of the most affordable and quickest prefab building techniques due to the high degree of work completed off-site.

  • Kit Home - all materials and components necessary for building a home are pre-measured, cut, and delivered to the build site. In some cases, an owner builder can assemble the kit home themselves as a cost-saving method.

  • Panelized - the home’s structural components: walls, floor, ceiling, are manufactured separate from one another in off-site location. From there they are shipped and constructed at the final site like a traditional build. While somewhat similar to modular construction, panelized building offers more flexibility in the home build process.

    • Some builders advertise using Structural Insulated Panels (SIPs) which are a 2-in-1 combination of high-efficiency insulation and structural panels. This allows for the creation of a quick, energy-efficient prefab home.

• Architect/manufacturer vs. All-in Company - There are many steps in the prefab home build process. Major steps include land acquisition, home design, manufacturing, and assembly. When selecting a company for your prefab home, you should also pay attention to the services your company offers. In some cases the company you choose may only offer a home design and therefore sub-contract out the manufacturing process, though this is not as common, as homes that offer both home design and manufacturing. This type of company however, still leaves you responsible for acquiring land and later finding a local builder to complete necessary site work and finish your home at the project site. It is worth noting that there are several companies that offer all-in-one services and can assist you in all stages of the home-build process including design, manufacturing, site work, and finishing your home. 

• Financing your home - unless you are planning to pay for your home in cash, you are likely going to need outside financing for your prefab home. The two most common ways of financing a prefab home build are:

  • construction loan - a short term loan that you can refinance once construction is complete

  • temp to perm loan - a construction loan for the duration of construction that converts to a normal mortgage once your house is finished. The advantage of these loans is you only have one mortgage close vs. two with just a construction loan.

  • These methods usually allow you to finance both the land purchase and the construction of your home however, the underwriting and approval process on these loans can be lengthy (60+ days) as the bank is not only underwriting you as a borrower, but also the viability of your building plans. To get land more quickly, buyers will often pay cash for their building lot and then the lender will credit the land purchase as a down payment percentage on the purchase.

  • Some of the best lenders for these products only operate regionally. Therefore, if you would like assistance specific to your situation, we can provide recommendations here.

  • If you’re looking to purchase an ADU (accessory dwelling unit) or tiny home, then you may want to consider a personal loan:

    • Many personal lenders allow you to borrow up to $100k with no down payment

    • These loans are typically amortized over a shorter period than mortgages (up to 12 years)

    • These loans typically don’t underwrite the property and instead underwrite you as a borrower

    • Many of the best personal lenders are online and serve almost the entire country

    • The time to get approved for a personal loan is generally pretty fast (as little as a day to up to a couple weeks)

Common Questions

• How much will it cost to build a prefab house in towns like Vail, Breckenridge, Telluride, Crested Butte, or Steamboat Springs?

  • While certain variables such as location, builder, and floor plan will affect the total cost of building your home, it is our experience that the final cost of your prefab will range between $250 - $400+ per sqft (as of February, 2020).

• Is a prefab home a good investment?

  • Yes, in areas where the total cost of building your prefab home (land cost + building costs)  is less than the average dollar per square foot sales price of homes in your neighborhood i.e. you are able to sell your home for more than it cost to build it. In Colorado's Mountain Towns that includes areas where the average price per square foot is $485 per sq ft or higher. This primarily includes the areas in and around Vail, Breckenridge, Aspen, Telluride, Steamboat Springs, and Crested Butte. It is important to note that the hardest part of a project in these areas is finding a buildable piece of land at a reasonable price.

• Can I finance a prefab home in Colorado? 

  • Yes. The most common way to finance a prefab home is a temp to perm loan. This financing method starts out as a loan for the construction of your home and converts to a mortgage once your home is completed. Another financing option is a construction loan which is a short-term loan that you then refinance once the construction process is finished. 

• What do the economics of an investment in a prefab home look like?

  • Our spreadsheet (below) is an example of what the costs and potential benefits of a prefab home investment might look like. While there may be high up-front costs, it is likely there will be a sizable return on your investment. In high-demand areas such as Vail, Aspen, and Telluride, one of the most challenging parts of the build process is finding a buildable lot at a reasonable price.

• How long will it take?

  • The answer to this question depends a lot on your particular location. Your city’s permitting and building process will play a large role in determining the time frame for your build. Total, the build process can take between 1-2 years and maybe longer if there is a design review process.

  • Planning Departments in and around Colorado's Mountain Towns:

    • Vail

    • Telluride

    • Aspen

    • Breckenridge

    • Steamboat Springs

    • Crested Butte

Reputable Companies that Serve Colorado's Mountain Towns:

• Irontown Homes

  • Utah-based designer and manufacturer of modern homes with spanish influences

  • All-in-cost: $320 - $390 per sqft

• Barn Pros

  • A timber-frame kit home manufacturer specializing in barn-home designs

  • All-in-cost: $250 - $300+ per sqft

• Purcell Timber Frame Homes

  • Designs and manufactures timber frame home exteriors in a variety of styles and sizes with the option for full customization

  • All-in-cost: $300 - $400 per sqft

• Rocky Mountain Home Builders

  • Makes 9 standard home plans as well as 3 small cabins and custom homes

  • All-in-cost: $250 - $300 per sqft

• Colorado Modular Homes

  • Full-service prefab home provider offering both pre-designed and custom homes in cabin-like designs

  • All-in-cost: $250 - $300 per sqft

• Phoenix Haus

  • Offer 5 models of pre-designed homes in addition to custom projects, all of which can be built to Passive House standards

  • All-in-cost: $250+ per sqft

Alternatively, see our list of prefab home builders and modular home builders in Colorado or our list of tiny homes for sale in Colorado. For project-specific assistance, speak with a member of our Prefab Concierge program.