Guide to Building Prefab and Modular Homes in Philadelphia, Pennsylvania
As a buyer interested in building a prefab home in the Philadelphia, Pennsylvania area, you may have several unanswered questions about the prefab home building process. These questions may range from the simple, “how much will it cost to build a prefab home in Philadelphia?” to the more complex, “What prefab home manufacturers serve the Philadelphia area and what are their strengths?”. Luckily our Guide to Building Prefab and Modular Homes in Philadelphia, Pennsylvania has you covered. Within Philadelphia, we cover areas that are well-suited for building a prefab home such as Center City, Fairmount, Riverfront, Fishtown, and Chestnut Hill as well as surrounding towns such as Villanova, Gladwyne, Upper Makefield and New Hope. Continue reading to learn more about the prefab and modular home building process in Philadelphia, Pennsylvania or for more specific advice, connect with one of our prefab home experts here.
Why Might You Want to Build a Prefab Home in the Greater Philadelphia, Pennsylvania Area?
Quick Build Times - because prefab and modular homes are manufactured off-site and assembled at the final build site, multiple steps of the project can be completed simultaneously and more efficiently than a traditional home build. As a result, build times are often significantly less than traditional, site-built homes.
Cost Controlled - using a highly controlled build process (homes are manufactured in climate-controlled production and cutting facilities), unforeseen cost overruns can be better managed leading to reduced overall cost. This is especially necessary for expensive neighborhoods of Philadelphia like Center City, Fairmount, Riverfront, Fishtown, and Chestnut Hill and surrounding towns such as Villanova, Gladwyne, Upper Makefield, and New Hope.
Quick build times and well-managed, projects are especially important in Philadelphia and towns on the Main Line and surrounding areas due to the risk of winter storms and unpredictable summer weather which could delay on-site construction
Sustainable & Modern - a majority of the prefab and modular home manufacturers that serve Philadelphia and the rest of south eastern Pennsylvania including towns like Villanova, Gladwyne, Upper Makefield, and New Hope can build energy efficient, net-zero homes. Additionally, it is possible to get a prefab home from these manufacturers that features modern designs, and high-tech elements and appliances
Key Decisions to Make:
Home Location - while the initial cost to build a prefab home may be high in neighborhoods such as Center City, Fairmount, Riverfront, Fishtown, and Chestnut Hill or surrounding towns like Villanova, Gladwyne, Upper Makefield and New Hope, a newly-built prefab home in these areas can be a sound long-term investment. When considering where exactly to build your home, you should be mindful of a few things that could affect your project:
Slope of lot - steep hills can make it difficult to build most pre-designed prefabs
Set back requirements which can limit the buildable area of your property
Floor area ratio or other zoning protocols that may affect the size of the home
Whether or not your neighborhood requires a design review
Custom vs. Standard - While most builders offer a set of pre-designed floor plans, while some also offer options for partial or total home customization. Other builders may specialize in custom prefab home designs. If you live on a tricky lot (uneven terrain, small-lot size, etc.) you may face a limited offering of standard home designs that are suitable for your home build
Modular vs. Kit Home v.s. Panelized - While all three of these construction techniques qualify as prefab home building techniques, there are nuances that you should know when building your own prefab house. These prefab home styles include:
Modular - homes are made up of multiple box-like modules. These modules are fully manufactured and assembled off-site and consist of floors, walls, ceilings, wiring, plumbing, and internal fixtures. After being assembled in an off-site facility, they are shipped to your desired location and the modules are connected and fastened to the foundation. Modular construction is one of the most affordable and quickest prefab building techniques due to the high degree of work completed off-site.
Kit Home - all materials and components necessary for building a home are pre-measured, cut, and delivered to the build site. In some cases, an owner builder can assemble the kit home themselves as a cost-saving method.
Panelized - the home’s structural components: walls, floor, ceiling, are manufactured separate from one another in off-site location. From there they are shipped and constructed at the final site like a traditional build. While somewhat similar to modular construction, panelized building offers more flexibility in the home build process.
Some builders advertise using Structural Insulated Panels (SIPs) which are a 2-in-1 combination of high-efficiency insulation and structural panels. This allows for the creation of a quick, energy-efficient prefab home.
Architect/manufacturer vs. All-in Company - There are many steps in the prefab home build process. Major steps include land acquisition, home design, manufacturing, and assembly. When selecting a company for your prefab home, you should also pay attention to the services your company offers. In some cases the company you choose may only offer a home design and therefore sub-contract out the manufacturing process, though this is not as common, as homes that offer both home design and manufacturing. This type of company however, still leaves you responsible for acquiring land and later finding a local builder to complete necessary site work and finish your home at the project site. It is worth noting that there are several companies that offer all-in-one services and can assist you in all stages of the home-build process including design, manufacturing, site work, and finishing your home.
Financing your home - unless you are planning to pay for your home in cash, you are likely going to need outside financing for your prefab home. The two most common ways of financing a prefab home build are:
construction loan - a short term loan that you can refinance once construction is complete
temp to perm loan - a construction loan for the duration of construction that converts to a normal mortgage once your house is finished. The advantage of these loans is you only have one mortgage close vs. two with just a construction loan.
These methods usually allow you to finance both the land purchase and the construction of your home however, the underwriting and approval process on these loans can be lengthy (60+ days) as the bank is not only underwriting you as a borrower, but also the viability of your building plans. To get land more quickly, buyers will often pay cash for their building lot and then the lender will credit the land purchase as a down payment percentage on the purchase.
Some of the best lenders for these products only operate regionally. Our list of the Best Lenders for Land Loans and Construction Loans in Pennsylvania can be found here. However, if you would like assistance specific to your situation, we can provide recommendations here.
If you’re looking to purchase an ADU (accessory dwelling unit) or tiny home, then you may want to consider a personal loan:
Many personal lenders allow you to borrow up to $100k with no down payment
These loans are typically amortized over a shorter period than mortgages (up to 12 years)
These loans typically don’t underwrite the property and instead underwrite you as a borrower
Many of the best personal lenders are online and serve almost the entire country
The time to get approved for a personal loan is generally pretty fast (as little as a day to up to a couple weeks)
Common Questions
How much will it cost to build a prefab house in Philadelphia, Pennsylvania or surrounding areas like Villanova, Gladwyne, New Hope, or Upper Makefield?
While certain variables such as location, builder, and floor plan will affect the total cost of building your home, it is our experience that the final cost of your prefab will range between $175-$425+ (as of January, 2020).
Is a prefab home a good investment?
Yes, in areas where the total cost of building your prefab home (land cost + building costs) is less than the average dollar per square foot sales price of homes in your neighborhood i.e. you are able to sell your home for more than it cost to build it. In Philadelphia, that includes areas where the average price per square foot is $370 per sq ft or higher. This includes neighborhoods in Philadelphia such as Center City, Fairmount, Riverfront, Fishtown, and Chestnut Hill in addition to many towns on the Main Line and towns surrounding Philadelphia like Villanova, Gladwyne, Upper Makefield, New Hope. It is important to note that the hardest part of a project in these areas, is finding buildable land or even lots suitable for tear down that will work within the price range and time frame of your project.
Can I finance a prefab home in the Philadelphia area?
Yes. The most common way to finance a prefab home is a temp to perm loan. This financing method starts out as a loan for the construction of your home and converts to a mortgage once your home is completed. Another financing option is a construction loan which is a short-term loan that you then refinance once the construction process is finished. Our guide to the Best Construction and Land Loan Lenders in Pennsylvania may be helpful.
What do the economics of an investment in a prefab home look like?
Our spreadsheet (below) is an example of what the costs and potential benefits of a prefab home investment might look like. While there may be high up-front costs, it is likely there will be a sizable return on your investment, especially as real estate values in and around Philadelphia continue to appreciate. In high-demand areas like Philadelphia and towns like Gladwyne and Villanova, one of the most challenging parts of the build process is finding a buildable lot at a reasonable price. In some cases it might be cheaper to buy and tear-down an existing home rather than purchase a vacant, build-ready lot.
| Item | Unit | Fairmount, Philadelphia, PA | Chestnut Hill, Philadelphia, PA | Villanova, PA | Notes |
|---|---|---|---|---|---|
| Cost To Build | |||||
| Cost of lot including closing costs & buyers agent | $ | 190,000 | 300,000 | 300,000 | |
| Cost of prefab home + construction | $ | 900,000 | 1,050,000 | 1,200,000 | |
| Loan Rate | 4.50% | 4.50% | 4.50% | ||
| Loan | $ | 58,860 | 72,900 | 81,000 | 4.5% APR (interest only), 18 months project time, 20% down |
| Value of tax deduction | $ | -20,601 | -25,515 | -28,350 | Assumes income to deduct and 35% marginal tax rate |
| Total cost to build | $ | 1,128,259 | 1,397,385 | 1,552,650 | |
| ARV (after repair value) | This is the term for post-construction value | ||||
| $ per sqft comps for new construction | $ | 450 | 550 | 425 | |
| Size of new home | Sqft | 3,000 | 3,500 | 4,000 | |
| Cost to buy similar home | $ | 1,350,000 | 1,925,000 | 1,700,000 | |
| Return On A Flip | |||||
| Sale price | $ | 1,350,000 | 1,925,000 | 1,700,000 | |
| Cost to Build | $ | $1,128,259 | $1,397,385 | $1,552,650 | |
| Broker Fees | $ | $81,000 | $115,500 | $102,000 | 6% |
| Closing costs | $ | $27,000 | $38,500 | $34,000 | 2% |
| Profit before taxes | $ | 113,741 | 373,615 | 11,350 | |
| PLEASE NOTE: THESE MODELS ARE NOT GUARANTEES AND SHOULD NOT BE CONSIDERED FINANCIAL ADVICE. THEY ARE FOR EDUCATIONAL PURPOSES ONLY AND PURELY ILLUSTRATIVE EXAMPLES OF POTENTIAL BUYING SCENARIOS. BUYERS SHOULD DO THEIR OWN DILIGENCE BEFORE MAKING ANY PURCHASE. | |||||
How long will it take?
The answer to this question depends a lot on your particular location. Your city’s permitting and building process will play a large role in determining the timeframe for your build. Total, the build process can take between 1-2 years and maybe longer if there is a design review process.
Planning Departments in and around Philadelphia:
Reputable Companies that Serve the Philadelphia, Pennsylvania Area:
Pennsylvania based company offering a range of design and custom manufacturing services
All-in-cost: $175 - $300+ per sq ft
Pennsylvania based designed and manufacturer of pre-designed and custom homes using timber frame and Structural Insulated Panel (SIPs) construction methods
All-in-cost: $200 - $250 per sqft
Specialize net-zero, farmhouse-chic homes that can either be purchased pre-designed or custom
All-in-cost: $280 - $385 per sq ft
Pittsburgh based company with 4 turn key models which can be easily expanded with one of their add-on units
All-in-cost: $280 - $385 per sq ft
New York based custom home prefab designer with a specialty in modern designs
All-in-cost: $250 - $425+ per sq ft
Offer both custom and pre-designed homes using timber frame construction techniques
All-in-cost: $175 - $300 per sq ft
Alternatively, see our list of prefab home builders and modular home builders in Pennsylvania. Or, for project-specific assistance, speak with a member of our Prefab Concierge program.
