Guide to Building Prefab and Modular Homes in Northern Florida - Jacksonville, St Augustine, Daytona Beach
Our guide to building prefab and modular homes in Northern Florida addresses key points of building on Florida’s northeastern coast with a focus on cities such as Jacksonville, Saint Augustine, and Daytona Beach. Within our guide to building prefab and modular homes in Northern Florida, we answer questions that you may have about the prefab and modular home building process. In this guide, we address general questions about the process such as, “why should I build a prefab home in Jacksonville?” or “how much will it cost to build a prefab home in Saint Augustine or Daytona Beach?’ and outline key decisions that you must make along the way. Below, you can find our answers to these questions as well as a breakdown of the economics of a prefab home built in Northern Florida including in areas like Jacksonville, St Augustine, and Daytona Beach. For more project-specific guidance, connect with one of our prefab home experts for free here.
Why Might You Want to Build a Prefab Home in Northern Florida including Jacksonville, St Augustine, and Daytona Beach?
Quicker Build and Installation Times - prefab and modular homes are manufactured off-site, in a controlled environment and then later assembled at the build site. The efficiency of off-site manufacturing facilities often allows for quicker build times
In spite of the sometimes unpredictable weather conditions in Florida, the home manufacturing process can continue uninterrupted year round because homes are manufactured off-site, indoors
Cost Controlled - with a highly controlled build process (homes are manufactured in climate-controlled warehouses), unforeseen cost overruns can be better managed leading to reduced overall cost. This is especially important for expensive areas in Northeastern Florida like Jacksonville, St Augustine, and Daytona Beach
Sustainable & Modern - many prefab builders that serve cities like Jacksonville, St Augustine, Daytona Beach, and the surrounding areas can build energy efficient, net-zero homes. Many manufacturers specialize in homes that are LEED and Passive House certifiable.
Additionally, many builders that serve cities throughout Northeastern Florida design and manufacture homes that can withstand the hot climate and high winds from tropical storms and hurricanes.
Key Decisions to Make:
Home Location - building in an expensive area on the Atlantic Coast of Northern Florida such as Jacksonville, St Augustine, and Daytona Beach might have high up-front costs but a prefab home in these (or other high-cost) areas can be a sound long-term investment. When buying property you should be mindful of a few things that could affect your home build:
Slope of lot - while this may not be as big an issue in cities like Jacksonville, Saint Augustine, or Daytona as in other more hilly areas like San Francisco, building lots with a significant slope may be unsuitable for some pre-engineered floor plans
Set back requirements
Floor area ratio or other zoning protocols that may affect the size of the home
Whether or not your neighborhood requires a design review
Standard vs. Custom - While many prefab manufacturers that operate in Jacksonville, St Augustine, Daytona Beach and other cities throughout Northeastern Florida offer pre-designed floor plans, some also offer options for partial or total home customization. This is in addition to companies who primarily serve as prefab designers and only work on custom prefab and modular homes. If you live on a tricky lot (uneven terrain, small-lot size, etc.) you may face a limited offering of standard home designs that are suitable for your situation - in these situations a custom home may be your best option
Modular vs. Kit Home v.s. Panelized - While all three of these construction techniques qualify as prefab home building techniques, there are nuances that you should know when building your own prefab house. These prefab home styles include:
Modular - homes are made up of multiple box-like modules. These modules are fully assembled and consist of floor, walls, ceiling, wiring, plumbing, and internal fixtures. These modules are constructed off-site and then later shipped to your desired location. Once on site, they are joined and connected to the foundation. Modular construction is one of the most affordable prefab building techniques.
Kit Home - all materials and components necessary for building a home are delivered to the build site. In most cases, an owner-builder can assemble the kit home themselves as a cost-saving method.
Panelized - the home’s structural components: walls, floor, ceiling, are manufactured off-site and then later constructed at the final site like a traditional build. While somewhat similar to modular construction, panelized building offers more flexibility in the home build process.
Architect vs. All-in Company - There are many steps in the prefab home build process. Major steps include land acquisition, home design, manufacturing, and assembly. When selecting a company for your prefab home, you should pay attention to the services your company offers. In some cases the company you choose may only offer a home design your home and therefore sub-contract out the manufacturing process. This leaves you responsible for acquiring land and later finding a builder to assemble the home. Other companies however, may be a one-stop shop and assist you in all stages of the home build process.
Financing your home - unless you are planning to pay for your home in cash, you are likely going to need outside financing for your prefab home. The two most common ways of financing a prefab home build are:
construction loan - a short term loan that you can refinance once construction is complete
temp to perm loan - a construction loan for the duration of construction that converts to a normal mortgage once your house is finished. The advantage of these loans is you only have one mortgage close vs. two with just a construction loan.
These methods usually allow you to finance both the land purchase and the construction of your home however, the underwriting and approval process on these loans can be lengthy (60+ days) as the bank is not only underwriting you as a borrower, but also the viability of your building plans. To get land imore quickly, buyers will often pay cash for their building lot and then the lender will credit the land purchase as a down payment percentage on the purchase.
Some of the best lenders for these products only operate regionally. Therefore, if you would like assistance we can provide recommendations here.
If you’re looking to purchase an ADU (accessory dwelling unit) or tiny home, then you may want to consider a personal loan:
Many personal lenders allow you to borrow up to $100k with no down payment
These loans are typically amortized over a shorter period than mortgages (up to 12 years)
These loans typically don’t underwrite the property and instead underwrite you as a borrower
Many of the best personal lenders are online and serve almost the entire country
The time to get approved for a personal loan is generally pretty fast (as little as a day to up to a couple weeks)
Common Questions
How much will it cost to build a prefab house in Jacksonville, Saint Augustine, and Daytona Beach?
While certain variables such as location, builder, and floor plan will affect the total cost of building your home, it is our experience that the final cost of your prefab will range between $80 and $450 per sqft before the cost of land, as of October, 2020.
Is a prefab home a good investment?
Yes, in areas where the total cost of building your prefab home (land cost + building costs) is less than the average dollar per square foot sales price of homes in your neighborhood i.e. you are able to sell your home for more than it cost to build it. In higher-end parts of Northeastern Florida like Saint Augustine or Jacksonville Beach that includes areas where the average sale price per square foot is $280 per sq ft or higher. In areas where plots of land are more affordable like some parts of Daytona Beach and Jacksonville, a break-even sale price can be even lower; in cases where you can find an affordable piece of land this figure can be close to $200 per sqft.
Can I finance a prefab home in Jacksonville, Saint Augustine, or Daytona Beach?
Yes. The most common way to finance a prefab home is a temp to perm loan or a construction loan if you already own the land. This financing method starts out as a loan for the construction of your home and converts to a mortgage once your home is completed. Another financing option is a construction loan which is a short-term loan that you then refinance once the construction process is finished
What do the economics of an investment in a prefab home look like?
Our table (below) is an example of what the costs and potential benefits of a prefab home investment might look like. While there may be high up-front costs, there is still a chance for a sizable return on your investment.
| Item | Unit | Jacksonville, Florida | Saint Augustine, Florida | Daytona Beach, Florida | Notes |
|---|---|---|---|---|---|
| Cost To Build | |||||
| Cost of lot including closing costs & buyers agent | $ | 50,000 | 99,000 | 89,000 | |
| Cost of prefab home + construction | $ | 476,000 | 660,000 | 450,000 | |
| Loan Rate | 3.00% | 3.00% | 3.00% | ||
| Loan | $ | 18,936 | 27,324 | 19,404 | 3% APR (interest only), 18 months project time, 20% down |
| Value of tax deduction | $ | -6,628 | -9,563 | -6,791 | Assumes income to deduct and 35% marginal tax rate |
| Total cost to build | $ | 538,308 | 776,761 | 551,613 | |
| ARV (after repair value) | This is the term for post-construction value | ||||
| $ per sqft comps for new construction | $ | 210 | 285 | 200 | |
| Size of new home | Sqft | 2,800 | 3,000 | 3,000 | |
| Cost to buy similar home | $ | 588,000 | 855,000 | 600,000 | |
| Return On A Flip | |||||
| Sale price | $ | 588,000 | 855,000 | 600,000 | |
| Cost to Build | $ | $538,308 | $776,761 | $551,613 | |
| Broker Fees | $ | $35,280 | $51,300 | $36,000 | 6% |
| Closing costs | $ | $11,760 | $17,100 | $12,000 | 2% |
| Profit before taxes | $ | 2,652 | 9,839 | 387 | |
| PLEASE NOTE: THESE MODELS ARE NOT GUARANTEES AND SHOULD NOT BE CONSIDERED FINANCIAL ADVICE. THEY ARE FOR EDUCATIONAL PURPOSES ONLY AND PURELY ILLUSTRATIVE EXAMPLES OF POTENTIAL BUYING SCENARIOS. BUYERS SHOULD DO THEIR OWN DILIGENCE BEFORE MAKING ANY PURCHASE. | |||||
How long will it take?
The answer to this question depends a lot on your particular location. Your town’s permitting and building process will play a large role in determining the timeframe for your build. Total, the build process can take between 1-2 years and maybe longer if there is a design review process.
Planning Departments in Northeastern Florida
Reputable Companies that Serve Northeastern Florida - Jacksonville, Jacksonville Beach, Saint Augustine, Daytona Beach
Offers 3 home designs, though the main feature is their weeHouse, a rectangular unit that can be configured in a number of ways to achieve a custom design.
All-in-cost: $250 - $490 per sq ft
With over 70 years of experience and 59 model designs, this company builds a variety of different home styles and sizes.
All-in-cost: $290 - $420 per sq ft
Design and build high-end, modern homes in 11 pre-designed floor plans and can also custom design homes
All-in-cost: $350 - $500 per sq ft
Has over 10 models of cylindrical homes, featuring multi-story decks and 360 degree views. Homes are also built to be hurricane-resistant
All-in-cost: $180 - $400 per sqft
One of the largest prefab home companies in Florida, offer 120 models and turn-key building services
All-in-cost: $80 - $140+ per sqft
Florida-based designer and manufacturer of shipping container homes with 6 pre-designed models to choose from
All-in-cost: $125 - $215 per sqft
Alternatively, see our list of prefab home builders and modular home builders in Florida or our list of tiny homes for sale in Florida. For project-specific assistance, speak with a member of our Prefab Concierge program.
